Single dunƙule extruder

Takaitaccen Bayani:

Kowane irin JHD extruder ne yafi amfani a PVC, PE, PP, PS, ABS, PA, PMMA, PET da dai sauransu roba abu extrusion.Sanye take da m mold da ƙasa kayan aiki, da extruder iya samar da filastik takardar, fim, profile, bututu da dai sauransu kayayyakin.Hakanan za'a iya amfani da sukurori guda ɗaya a filin pelletizing.

JHD Single dunƙule extruder tare da sabunta sabon zane a kan hangen zaman gaba , lantarki tsarin , m ƙarfi firam .Yana zai yi aiki tare da karin inganci da makamashi ceto .

Customerized soulution ne ko da yaushe avaliable ga daban-daban aikace-aikace, mu'amala daban-daban roba kayan.


Cikakken Bayani

Tags samfurin

Bayanin samfur

Mai fitar da dunƙule guda ɗaya ya ƙunshi dunƙule Archimedean da ke juyawa a cikin ganga mai zafi.Saboda tsarinsa mai sauƙi, masana'anta mai sauƙi, ingantaccen aiki da ƙananan farashi, ana amfani dashi ko'ina.Ita ce mafi balagagge fasaha da kuma mafi amfani da irin extruder.

A halin yanzu, dunƙule extruder guda daya ya ɓullo daga asali asali karkace tsarin, kamar damping dunƙule block, shaye dunƙule, slotted dunƙule ganga, fil ganga, gini tubalan da sauran daban-daban tsarin iri.A lokaci guda kuma, saboda ƙananan sararin samaniya da ke tattare da sukurori guda ɗaya, ya zama babban kayan aiki a fagen sarrafa kayan aiki da kuma fim ɗin busa filastik.

1. bututu extrusion: dace da PP-R bututu, PE gas bututu, PEX giciye-linked bututu, aluminum filastik hada bututu, ABS bututu, PVC bututu, HDPE silicon core bututu da kowane irin coextrusion hada bututu.

2. Plate da takardar extrusion: dace da extrusion na PVC, Pet, PS, PP, PC da sauran bayanan martaba da faranti.Sauran nau'ikan extrusion na robobi, kamar waya, sanda, da sauransu.

3. Extrusion na bayanin martaba: daidaita saurin extruder kuma canza tsarin ƙirar extrusion, wanda za'a iya amfani dashi don samar da PVC, polyolefin da sauran bayanan filastik.Gyaran granulation: dace da haɗuwa, gyare-gyare da ƙarfafa granulation na robobi daban-daban.

Siffofin screw extruder guda ɗaya:

·Babban gudun da kuma yawan amfanin ƙasa Extrusion Bisa babban inganci.

·Ma'anar zane na ƙananan zafin jiki na filastik yana tabbatar da extrusion na samfurori masu inganci.

·Mataki na biyu gabaɗayan ƙira, ƙarfafa aikin filastik, tabbatar da babban aikin extrusion.

·Shamaki na musamman da cikakkiyar ƙirar haɗawa suna tabbatar da tasirin haɗakarwa na kayan.

·Maɗaukakin fitarwa mai ƙarfi, babban juzu'i mai girma.

·Gears da shafts an yi su da ƙarfe mai ƙarfi mai ƙarfi, carburized da ƙasa.

·Babban taurin, babban gamawa, ƙaramar ƙaranci.

·PLC mai kula da hankali na iya gane haɗin kai tsakanin manyan injunan da ƙarin injuna.

Yana da sauƙi don saka idanu kan ƙirar mutum-injin, sauƙin fahimtar sarrafawa da matsayi na inji.

·Yanayin sarrafawa (kayan sarrafa zafin jiki) na iya canza yadda ake buƙata.

·Kayan shine 38CrMoAl / maganin nitriding, sawa mai juriya.

·Madaidaicin kula da zafin jiki, haɗe tare da sanyaya iska da sanyaya ruwan sanyi.

·Ƙirar mashiga ta musamman, tare da cikakkiyar na'urar sanyaya ruwa.

·Da dunƙule ganga tare da tsagi surface ciyar kasa hannun riga iya inganta ciyar da aikin, wanda bayar da garanti ga high-gudun da high-amfani extrusion.

Kowane irin JHD extruder ne yafi amfani a PVC, PE, PP, PS, ABS, PA, PMMA, PET da dai sauransu roba abu extrusion.Sanye take da m mold da ƙasa kayan aiki, da extruder iya samar da filastik takardar, fim, profile, bututu da dai sauransu kayayyakin.Hakanan za'a iya amfani da sukurori guda ɗaya a filin pelletizing.

Single dunƙule extruder Babban halaye:

Babban tsarin sarrafa tsarin kwamfuta yana ba da damar aiwatar da sarrafawa ta atomatik akan layin samarwa gabaɗaya.

Tsarin kula da zafin jiki na kyakkyawan aiki yana tabbatar da ingantaccen fitarwa.

Tsarin tuƙi mai ƙarfi yana tabbatar da dorewa da sauƙin kulawa.

Zane na tilasta sanyaya ruwa da ciyar da tsagi hannun riga yana tabbatar da tsayayyen samarwa.

Low abrasion zane na dunƙule

High Fusion na abu

Fusion na abu a hankali

Ƙananan amfani da makamashi

Ko da chroma da kyakkyawan sakamako na samar da cakuda da aka riga aka tsara

Babban Sigar Fasaha

Samfura JHD45 JHD60 JHD75 JHD90 JHD100 JHD120 JHD150
Motoci (KW) 7.5-45 22-90 37-132 45-185 55-280 75-315 90-355
dunƙule dia.(mm) 45 60 75 90 100 120 150
rabon L/D 25-33 25-33 25-35 25-35 25-35 25-35 25-35
Filastik da aka samar PVC, PE, PP, PS, ABS, PA, PMMA, PET da dai sauransu
Fitowar fitarwa Daban-daban bisa ga filastik daban-daban da injunan injin

  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana